| |
Ask us about this machine!
HAEUSLER FKB CNC 3-Roller for Fuselage Panels and Wing Edge Bending Machine in the aviation industry
| Width of plate max. |
|
10.000 mm |
| Bending at full plate width |
|
6 mm |
| No. of rollers |
|
3 |
| Driven rollers |
|
3 |
| Arrangement of the rollers |
|
symmetrical |
| Operating speed |
|
3 m/min |
| Drive of the rollers |
|
hydraulic |
| Adjustable rollers |
|
2 |
| Roller material |
|
34CrNiMo6 |
| Surface treated up to |
|
900-1050 N/mm� |
| Hardened and rinded, |
|
|
| Top Rollerdiameter: |
|
80 mm |
| Bottom Rollerdiameter: |
|
80 mm |
| Max. roller pressure |
|
960 kN |
| Max. Slope of rollers |
|
160 mm |
| Max. adjustment of the top roll |
|
600 mm |
| Adjustment speed of the top roller without pressure |
|
500 mm/min |
| Adjustment speed of the top roll with pressure |
|
0-120 mm/min |
| Adjustment drive of the bottom roll |
|
electro-mechanical |
| Adjustment speed of the bottom rolls |
|
120 mm/min |
| Center distance of the bottom rolls |
|
120-400 mm |
| Max. slope of the bottom rolls |
|
160 mm |
| Tilting of the end bearing |
|
hydraulically |
| Lubrication |
|
twice central |
Capacity:
| Sheets width till 4.500 mm |
max. 10 mm prebending length 60 mm |
| Sheets width till 6.800 mm |
max. 8 mm prebending length 50 mm |
| Sheets width till 10.000 mm |
max. 6 mm prebending length 40 mm |
| Min. sheet thickness |
0,8 mm |
| Min. bending radius |
50 mm |
The indicated capacities are based
to a top roll dia. Of 100 mm
The capacities are reduced by 20 % when at a dia. Of 80 mm. |
| Total installed power |
|
50 kW |
| Power supply |
|
380V/50Hz |
| Cooling water: |
|
|
| Consuption of cooling water max. |
|
0,5 m�/h |
| Water pressure |
|
2 bar |
* Technical details on this website are not binding
This is not an offer in the juridicial sense
Customers are advised to check all vital details
Customers are responsible to ensure machines conform
to local safety regulations.
|
|